D100x140 S3 HDD
There is no substitute for downhole power, so try the Vermeer D100x140 S3 drill.
- Maximum rotary torque output of 14,000 ft-lb (18,981.5 Nm) and rotational speeds up to 203 rpm.
- Select between 15-ft or 20-ft (4.6-m or 6.1-m) lengths of 3.5-in (8.9-cm)
- Firestick® drill rod Dual displays for simpler operator use
FEATURES & BENEFITS
Angled, true open-top vises
Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 S3 offers good operator visibility during rod makeup/breakout. The true open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.
Dual displays
State-of-the-art dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.
Firestick drill rod
Experience the difference that has made one-piece, forged Firestick® drill rod the industry benchmark.
Increase your range
Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.
Stackable rod box
With consideration to ease of use and safety, the D100x140 S3 stackable rod box design allows additional rod to be loaded via the upper rod box. When matched with the optional onboard crane, no additional support equipment is required to load additional rod.
Wireless remote-controlled knuckle boom crane
The D100x140 S3 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5’ (6 m), the crane has a rated capacity of 3970 lb (1800.8 kg).
SPECIFICATIONS
| Make and Model | CAT |
| Gross Horsepower | 275 hp |
| Maximum Operating Angle (Left/Right)* | 25 |
| Maximum Operating Angle (Fore/Aft)* | 25 |
| Maximum Engine RPM | 2200 rpm |
| Fuel Type | Ultra low sulfur diesel |
| Max Fuel Consumption | 15 gph |
| Aspiration | Twin turbocharged |
| Automated Rod Loader | Semi-automated |
| Drill Rack Angle | 24 deg |
| Maximum Carriage Speed at Maximum Engine RPM | 200 ft/min |
| Maximum Ground Drive Speed at Maximum Engine RPM | 3 mph |
| Minimum Bore Diameter | 6 in |
| Maximum Spindle Speed at Max Engine RPM | 210 rpm |
| Maximum Spindle Torque (High at Maximum Engine RPM) | 7000 ft-lb |
| Maximum Spindle Torque (Medium at Maximum Engine RPM) | 10500 ft-lb |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 14000 ft-lb |
| Thrust | 100000 lbs |
| Pullback | 100000 lbs |
| Noise Level at Operator's Ear - 15 ft (4.6 m) | 82 dB(a) |
| Noise Level at Operator's Ear - 20 ft (6.1 m) | 84 dB(a) |
| Maximum Pressure | 1000 psi |
| Maximum Flow | 230 gpm |
| Brand | Aplex |
| Wireless Remote | Yes |
| Maximum Reach | 234 in |
| Optional Crane | Yes |
| Rotation | 360 deg |
| Maximum Lifting Capacity - Boom Extended/Max Reach | 3970 lbs |
| Maximum Lifting Capacity | 5070 lbs |
| Width (Minimum Transport) | 102 in |
| Width (With Cab, Minimum Transport) | 102 in |
| Height (Minimum Transport) | 138 in |
| Height (With Cab) | 138 in |
| Angle of Approach | 18 deg |
| Length (Minimum Transport) - 15 ft (4.6 m) | 376.8 in |
| Weight - 15 ft (6.1 m) | 50300 lbs |
| Weight (Cab Option) - 15 ft (4.6 m) | 49800 lbs |
| Length (Minimum Transport) - 20 ft (6.1 m) | 436.8 in |
| Weight - 20 ft (6.1 m) | 52500 lbs |
| Weight (Cab Option) - 20 ft (6.1 m) | 57220 lbs |
| Maximum Flow | 200 gpm |
| Maximum Pressure | 1100 psi |
| Brand | Kerr |
| Fuel Tank | 115 gal |
| Hydraulic Tank | 80 gal |
| Hydraulic System | 120 gal |
SEE IT IN ACTION
