PD5 Pile Driver
Solar field installations require the right machine to best fit your setup, and as the need for renewable energy grows, so should your options for pile drivers.
- Lightweight and small machine ideal for smaller installs or jobsites with less space
- Transport this machine quickly and efficiently
- Machine-integrated controls
FEATURES & BENEFITS
Compact design
Setup and teardown are quick and convenient with a rotating platform and a mast that can stay fully assembled and stow parallel with the tracks, making it convenient for the entire crew to move to the next job.
Keep it light
The PD5 weighs in at 10,380 lb (4708 kg), which allows for transporting up to two pile drivers on select trailers, and less potential damage to jobsites, all while helping increase efficiency of setup and teardown with a lightweight design.
Maintain accuracy
The PD5 has an optional laser receiver and an optional compatible third-party GPS system that can provide visual input to the operator, which can help improve productivity and alignment of the machine to the specified pile location.
Move along
With a forward ground drive speed of 2.4 mph (3.9 km/h), the PD5 moves quickly with less time wasted traveling and more time installing piles – keeping your installation efficiently moving forward.
On-machine control
Walk-beside, machine-integrated controls allow the operator to control machine functions, including engagement of hammer, pile placement and ground drive. Operators can remain off the machine and walk beside it, with conveniently placed controls to allow for intuitive operation and operator comfort.
Transportation ease
A small machine with a transport width of 87 in (221 cm), a transport height of 98 in (249 cm) and a transport length of 11.7 ft (3.6 m) allows more than one machine to be hauled on certain trailers.
SPECIFICATIONS
| Maximum Hammer Energy | 950 Joules |
| Maximum hammer impact | 1500 bpm |
| Maximum angle (direction of travel) | 10 deg |
| Maximum angle (perpendicular to travel) | 10 deg |
| Impact drive type | High-frequency hammer |
| Maximum pile dimension (round - large opening) | 9.3 in |
| Maximum pile dimension (square - large opening) | 8.3 in |
| Voltage | 12 volts |
| Battery CCA Rating | 950 |
| Battery Group Class | 31 |
| Fuel Tank | 25 gal |
| Hydraulic Tank | 35 gal |
| Engine crankcase with filter | 2.5 gal |
| Hydraulic pump type | Parker PGP315 Gear |
| Track drive | Rubber tracks |
| Maximum Transport Speed | 2.4 mph |
| Make and Model | CAT C2.2T CRDI |
| Gross Horsepower | 48.8 hp |
| Number of Cylinders | 4 |
| Cooling Medium | Liquid |
| Fuel Type | Ultra Low Sulfur Diesel |
| EPA Certification Family | Tier 4F/EU Stage IIIB |
| Make and Model | CAT C2.2T |
| Gross Horsepower | 60 hp |
| Number of Cylinders | 4 |
| Cooling Medium | Liquid |
| Fuel Type | Diesel |
| EPA Certification Family | Tier 3 (Stage IIIA CA) |
| Transport width with track shield folded up | 87 in |
| Track width | 84 in |
| Maximum pile height | 15.5 ft |
| Operating weight | 10380 lbs |
| Maximum operating height | 19.6 ft |
| Operating length | 110.4 in |
| Operating width | 150 in |
| Transport Height | 98.4 in |
| Transport Length | 140.4 in |
| Transport Width | 87 in |
| Mast height | 15 ft |
SEE IT IN ACTION
