The RTX130 is equipped with a 13-hp (9.7-kW) Honda engine for optimal power on your jobsite.
Fits into narrow areas with a footprint that measures only 35-in (88.9-cm) wide.
Promotes on-the-job safety with an operator presence system that disengages the trencher and ground drives if the operator leaves the controls, in addition to a trenching cleat that restricts backward motion.
A 35-in (88.9-cm) width allows the RTX130 to access small spaces — including passing through typical backyard gates.
Elimination of the tail wheel on the track unit provides trenching depth control in uneven ground conditions and convenience to move through tight spaces.
Steers effortlessly with the VZ steering system that requires minimal effort to the handle bars.
| Displacement | 23.7 cu-in |
| Fuel Type | Gasoline |
| Maximum Operating Angle (Left/Right)* | 20 deg |
| Maximum Operating Angle (Fore/Aft)* | 20 deg |
| Make and Model | Honda GX390 |
| Number of Cylinders | 1 |
| Cooling Medium | Forced Air |
| Gross Horsepower | 13 hp |
| Horsepower at Maximum RPM (Gross) | 13 hp |
| Ground Drive Type | Hydrostatic |
| Clutch Type | none |
| Maximum Reverse Transport Speed at Full Throttle | 1 mph |
| Maximum Forward Transport Speed at Full Throttle | 3.1 mph |
| Height | 46 in |
| Tread Width with Rubber Tires (Centerline to Centerline) | 8.5 in |
| Wheel Base From Centerline of Axles | 33.2 in |
| Length (Tractor with Tires) | 83 in |
| Width (Over Rubber Tracks) | 35 in |
| Width (Over Rubber Tires) | 35 in |
| Weight (Tractor with Tires) | 880 lbs |
| Attachment Pump Relief Pressure (Trencher/Forward) | 2500 psi |
| Ground Drive Pump Relief Pressure Forward/Reverse | 2400 psi |
| Ground Drive Pump gpm at Maximum Engine RPM | 5.4 gpm |
| Hydraulic Supply Filter Rating | 100 mesh strainer |
| Attachment Pump gpm at Maximum Engine RPM | 8 gpm |
| Hydraulic Return Filter Rating | 3 micron |
| Hydraulic System | 11.3 gal |
| Hydraulic Tank | 10.8 gal |
| Fuel Tank | 1.6 gal |
| Engine Oil | .3 gal |