BC700XL Brush Chipper
Vermeer continues to respond to the demands of the rental, landscape and tree care professionals with the BC700XL brush chipper.
- Move from jobsite to jobsite with ease
- Maximum productivity while minimizing maintenance
- Safety features designed with the operator in mind
FEATURES & BENEFITS
25 hp (18.6 kW) electronic fuel-injected (EFI) Kohler engine
The 25 hp (18.6 kW) electronic fuel-injected (EFI) Kohler engine performs well during cold-weather starts, has reduced occurrence of engine flooding and provides improved fuel economy over comparable carbureted gas engines.
Bottom feed stop bar
A bottom feed stop bar is strategically located to make it possible for the operator's leg to strike the bar and shut off the feed mechanism either intentionally or automatically in an emergency situation.
Centrifugal clutch engagement
The centrifugal clutch engagement prevents belt slippage when engaging the clutch which means fewer maintenance costs.
Large infeed opening
The large infeed opening makes feeding irregular material easier and decreases the amount of saw cuts needed prior to feeding the chipper.
SmartFeed system
The exclusive SmartFeed, patented feed-sensing control system from Vermeer helps increase operator productivity and reduces strain on vital engine parts, as engine rpm is monitored and feed rollers are controlled.
Wide axle
The wide axle offers a wide footprint at the axle for side-to-side stability; additionally enhances transportability and visibility while backing up.
SPECIFICATIONS
| Height | 102 in |
| Tongue Weight - Engine Option One | 180 lbs |
| Weight - Engine Option One | 1800 lbs |
| Width | 71 in |
| Length - Feed Table Up, Tongue In | 115 in |
| Length - Table Down, Tongue Extended | 136 in |
| Make and Model | Kohler ECH740 |
| Oil Filter | Spin-on |
| Clutch Type | Manual |
| Fuel Type | Gasoline |
| Recommended Oil | Kohler oil or API CH4/SJ |
| Alternator | 20A Charging |
| Maximum Angle of Continuous Operation | 25 deg |
| Oil Volume with Filter | 2 qt |
| Max Fuel Consumption | 2.4 gph |
| Torque (Max) | 41.7 ft-lb |
| Gross Horsepower (Maximum) | 25 hp |
| Cooling Medium | Oil/Air |
| Air Cleaner | Kohler HD 2-Stage Dry |
| Fuel Tank Capacity | 6 gal |
| Extended Warranty | Available, Optional |
| Special Paint | Available, Optional |
| Preventive Maintenance | Available, Optional |
| Diameter | 2 in |
| Positions | Four position: (E-Stop), Forward, Stop, (Reverse) |
| Material Thickness | .1 in |
| Reset Method | Dual green hold-to-run buttons |
| Bottom Feed Stop Bar Material Thickness | 12" (30.48 cm) |
| Bottom Feed Stop Bar Diameter | 2 in |
| Green Hold to Run Button | Standard |
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Width | 8 in |
| Diameter | 23.9 in |
| Bedknife Material | ASTM A572 Grade 50 |
| Material | A8 Chipper Steel |
| Knife Thickness | .6 in |
| Material Capacity | 6 in |
| Bedknife Size | 4" x 8.6"/(10.2 cm x 21.9 cm) hor; 4" x 5.8"/(10.2 cm x 14.6 cm) vert |
| Air Flow | 5000 cfm |
| Fixture Method | Welded |
| Replaceable Threaded Knife Block | Yes |
| Weight With Shaft | 176 lbs |
| Speed | 1748 |
| Thickness | 1.3 in |
| Type | Flange-mounted ball type, self-aligning |
| Manufacturer | Linkbelt |
| Bore | 1.5 in |
| Static Capacity | 4460 lbs |
| Dynamic Capacity | 5640 lbs |
| Belt Type | 2-band 5-V profile Aramid |
| Belt Idler/Tensioner | Spring-loaded adjustable Idler |
| System Voltage | 12 Volt |
| Battery | Group 26, 400 CCA |
| Switches | Hold-to-run, sensitivity selector |
| Controller | Vermeer ACS CB02 |
| Standard Gauges | Hour meter |
| Hitch Type | 2"/(5.1 cm) ball coupler |
| Trailer Light Type | LED |
| Brake Type | Electric optional |
| Capacity - Option Two | 2000 lb/(907.2 kg) |
| Manufacturer - Option Two | Dexter |
| Type - Option Two | Rubber torsional, braked |
| Axle/Suspension - Option Two | 2000lb/(907.2 kg) rubber torsion axle with electric brakes |
| Wheels - Option One | 13 x 5, bolt circle 5 on 4.5 |
| Tires - Option One | ST185/80D13 load range D |
| Capacity - Option One | 2000 lb/(907.2 kg) |
| Manufacturer - Option One | Dexter |
| Type - Option One | Rubber Torsional |
| Axle/Suspension | 2000 lb/(907.2 kg) rubber torsion axle |
| Fender Description | .1"/(.3 cm) Steel bolt-on |
| Frame Description | 3/16"/(.5 cm) ASTM A1011 steel |
| Tank capacity | 6.8 gal |
| System relief pressure | 2500 psi |
| System Type | Open center |
| Recommended Oil Type | Vermeer VMF Gold |
| Filtration Method | Return flow filtration, 10 micron |
| Pump Flow at Maximum RPM | 3.8 gpm |
| Distance from Feed Table to Ground | 28.1 in |
| Pinch Point - Distance to End of Feed Table | 65.4 in |
| Infeed Throat Capacity | 6" x 8" (15.24 cm x 20.32 cm) |
| Infeed Hopper Height | 22.1 in |
| Infeed Table Length | 30.2 in |
| Infeed Table Width | 41.2 in |
| Feed Speed | 49.4 ft/min |
| Motor Manufacturer | White Hydraulics |
| Motor Displacement | 14 |
| Weight of Feed Roller | 100 lbs |
| Feed Roller Dimension | 10" Diameter |
| Feed Roller Minimum Distance to Drum | 4 in |
| Feed Roller Clamp Type | Spring/Feed Roller Weight |
| Feed Roller Clamp Load | 525 lbs |
| Feed Roller Orientation | Horizontal |
| Rotational Lock | Standard Latch |
| Rotation Type | Manual |
| Chute Rotation Angle | 240 deg |
| Deflector Thickness | .1 in |
| Side Wall Thickness | .1 in |
| Top Thickness | .1 in |
| Bottom Thickness | .1 in |
| Chute Height | 97.2 in |
SEE IT IN ACTION
