SC48TX Stump Cutter
Get in and out of sites efficiently with enough power to tackle the job.
- Efficient performance across stumps of all sizes
- Optimal power delivery at the stump
- Enhanced jobsite flexibility
FEATURES & BENEFITS
No matching record found!
SPECIFICATIONS
Engine - Option one
| Oil Volume with Filter | 5.3 qt |
| Oil Filter | Spin-on |
| Make and Model | CAT C1.7 T4F/Stage V |
| Maximum Angle of Continuous Operation | 35 deg |
| Fan | 16.5 in |
| Coolant Capacity (Engine and Radiator) | 2.9 gal |
| Clutch Type | Electric clutch with brake |
| Gross Horsepower (Maximum) | 48 hp |
| Cooling Medium | Water/antifreeze |
| Max Fuel Consumption | 2.9 gph |
| Fuel Tank Capacity | 14.5 gal |
| Torque (Max) | 123 ft-lb |
| Alternator | 85A |
| Recommended Oil | 10W-30 |
| Air Cleaner | Dry-type, restriction indicator, evacuator valve and safety element |
| Number of Cylinders | 3 |
| Fuel Type | Ultra-low sulfur diesel |
Hydraulic System
| Filtration Method | Full-flow 4-micron return filter, suction strainer |
| Recommended Oil Type | Vermeer highpower 68 |
| Pump Flow at Maximum RPM | 11 gpm |
| System Type | Tandem gear pump, pressure balanced |
| Oil Cooler | Yes |
| Directional Control | Yes |
| Tank capacity | 9 gal |
| System relief pressure | 2900 psi |
Chassis
| Frame Description | Welded tube and plate steel |
| Brake Type | Spring-applied and hydraulically-released dual parking brakes |
| Control Station Description | Swing out |
| Operator Vision Shield Description | Abrasion-resistant coated polycarbonate |
Electrical System
| Radio Remote Control | Optional, wireless |
| Switches | Boom swing, boom height, creep propel, ignition, clutch, track gauge, track speed range and throttle, blade |
| Battery | 950 CCA |
| System Voltage | 12 |
| Display | Multifunction display (MFD) that displays hours, fuel level, engine speed, engine faults and engine status |
| Controller | Danfoss |
| Shutdown System | High engine temperature and low oil pressure |
| Warning Lights | Engine warning |
General Dimensions and Weights
| Weight - Engine Option One | 3750 lbs |
| Sound Power | 107 dB(A) |
| Length | 140 in |
| Width (tracks retracted) | 35 in |
| Width (tracks extended) | 49 in |
| Height (non-remote unit) | 76 in |
| Height (remote unit) | 85 in |
Cutterwheel Drive Components
| Lower Gearbox | Straight bevel |
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil |
| Oil Capacity - Lower Gearbox | 1.6 qt |
| Driveshaft | 2 universal joints |
| Driveshaft - U Joints | 2 standard with double lip seal |
Cutterwheel System
| Cutterwheel Speed | 1235 rpm |
| Cutterwheel Thickness | 1.4 in |
| Number of Teeth | 27 |
| Tooth Description | Vermeer cutting system |
| Cutterwheel Guard | Standard |
| Reversible Pockets/Teeth | 24 |
| Cutterwheel Straight Line Dimension | 65 in |
| Cutterwheel Cut Above Ground | 28 in |
| Cutterwheel Cut Below Ground | 16 in |
| Chip Containment | 23 cu ft |
| Cutterwheel Diameter | 24 in |
| Number of wear plates | 6 |
Track Drive System
| Track Type | Rubber 7-in width |
| Track Drive Pump Type | Tandem gear pump, pressure balanced |
| Number of Idlers | 7 |
| Type of Idler | Cast |
| Low Speed Travel | 1.1 mph |
| Track Length on Ground | 47 in (119.4 cm) |
| Ground Bearing Pressure - Soft Ground | 5.7 psi |
| High Speed Travel | 1.5 mph |
| System Relief Pressure | 2900 psi |
Remote Control Option
| Radio Remote Control | Optional |
| Remote Display | LCD with remote control and machine functions status |
| Remote Range | 300 ft (91.4 m) |
| Remote Functions | E-stop, throttle, cutter wheel clutch, boom swing, boom height, propel, track mode and track speed range |
Other Options
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventive Maintenance | Optional |
Option One
| Blade Travel Above Ground | 8.5 in |
| Chip blade width (without extensions) | 34 in |
Ground Drive
| High Speed Travel | 140 ft/min |
| Low Speed Travel | 100 ft/min |
SEE IT IN ACTION
