BC1000SV Brush Chipper
Enhanced maneuverability and convenience with the BC1000SV brush chipper.
- Fuel efficient
- Greater feeding efficiency
- Facilitates transportation of equipment
- Operator safety in mind
- Improved durability of belt-drive system
- Enhanced productivity
FEATURES & BENEFITS
72-hp (54-kW) Cummins diesel engine
Performs well during cold weather, minimizes occurrence of engine flooding and provides improved fuel economy over comparable carbureted gas engines.
Large infeed opening
The 12-in x 17-in (30.5-cm x 43.2-cm) infeed opening maximizes efficient feeding of irregular material and minimizes the amount of saw cuts needed prior to feeding the chipper.
Clutchless PTO
The throttle integrated with the belt drive engagement process allows the PTO to only be engaged while the engine is at low/idle rpm, which helps to reduce premature wear and tear to the belt drive system by preventing high idle engagement of the cutter drum.
Convenient transportation with skid mount
Facilitates the transportation of equipment to help overcome various road regulation restrictions.
Bottom feed stop bar
The bottom feed stop bar is strategically-located to make it possible for the operator to strike the bar and shut off the feed mechanism.
SmartFeed control system
An exclusive feed-sensing control system that monitors motor current and automatically stops or reverses the feed roller, maximizing operator productivity and minimizing strain on vital motor parts.
SPECIFICATIONS
| Number of Knives | 2 |
| Feed Roller Dimension | 20 in x 17 in (50.8 cm x 43.2 cm) |
| Number of Feed Roller Motors | 1 |
| Feed Roller Orientation | Single horizontal |
| Number of Feed Rollers | 1 |
| Infeed Hopper Height | 12 in |
| Number of Knives (2) | 4 |
| Feed Roller Minimum Distance to Drum | 1 in |
| Infeed Table Length | 32 in |
| Infeed Throat Capacity | 12 in x 17 in (30.5 cm x 43.2 cm) |
| Feed Speed | 105 ft/min |
| Infeed Table Width | 52 in |
| Infeed Table Material Thickness | .2 in |
| Distance from Feed Table to Ground | 26 in |
| Tongue Weight - Engine Option One | 4762 lbs |
| Height | 91 in |
| Width | 67 in |
| Weight (without winch and hydraulic jack) | 4762 lbs |
| Length - Feed Table Up, Tongue In | 116 in |
| Length - Table Down, Tongue Extended | 138 in |
| Make and Model | Cummins QSF2.8 Turbo |
| Clutch Drive Engagement | Belt tensioner |
| Maximum Angle of Continuous Operation | 30 deg |
| Fan | F490W-25.4-60-7 |
| Coolant Capacity (Engine and Radiator) | 2.3 gal |
| Clutch Type | Clutchless PTO |
| Gross Horsepower (Maximum) | 72 hp |
| Cooling Medium | Liquid |
| Fuel Tank Capacity | 25 gal |
| Torque (Max) | 184 ft-lb |
| Recommended Oil | API CH4 |
| Number of Cylinders | 4 |
| Oil Volume with Filter | 8.5 qt |
| Fuel Type | Diesel |
| Bedknife - Number of Useable Edges | 4 |
| Bedknife Size | 17.25 in x 3.5 in x 1 in (8.89 cm x 43.82 cm x 2.54 cm) |
| Weight With Shaft | 460 lbs |
| Thickness | .4 in |
| Diameter | 22 in |
| Fixture Method | Weld-on |
| Number of Paddles | 3 |
| Number of Knives | 2 |
| Knife Size | 9 in x 4.5 in x .63 in (22.86 cm x 11.43 cm x 1.59 cm) |
| Safety Lock - Number of Positions | 2 |
| Speed | 2,264 rpm |
| Replaceable Threaded Knife Block | Yes |
| Number of Bolts/Knife | 4 |
| Useable Edges | 2 (reversible) |
| Width | 20 in |
| Bedknife Thickness | 1 in |
| Bedknife Material | 1018 |
| Material Capacity | 12 in |
| Knife Thickness | .6 in |
| Material | A8 chipper steel |
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Green Hold to Run Button | Standard |
| Reset Method | Dual green hold-to-run buttons |
| Reduced Sensitivity | 12 deg |
| Normal Sensitivity | 22 deg |
| Actuation Force (BFSB) | 34 lbs |
| Actuation Force | 34 lbs |
| Bottom Feed Stop Bar Diameter | 2 in |
| Positions | Four positions: E-stop, Forward, Stop, Reverse |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
| Manufacturer | Linkbelt |
| Dynamic Capacity | 31400 lbs |
| Belt Idler/Tensioner | Yes |
| Belt Type | 5 V |
| Bore | 2.4 in |
| Type | Spherical rollers |
| Number of Bearings | 2 |
| Static Capacity | 53500 lbs |
| Filtration Method | 10 micron return; 100 micron suction |
| Oil Cooler | No |
| Directional Control | Yes |
| System relief pressure | 2500 psi |
| Tank capacity | 7 gal |
| Recommended Oil Type | VMF Vermeer |
| System Type | Open center |
| Pump Flow at Maximum RPM | 2.7 gpm |
| Radio Remote Control | No |
| Switches | Droop and toggle switches |
| Battery | 31-950T, 850 CCA |
| Standard Gauges | Fuel and hour gauges |
| System Voltage | 12 V |
| Display | LED |
| Controller | Vermeer ACS |
| Shutdown System | High temperature, low pressure |
| Fender Description | Steel bolt-on |
| Frame Description | Z Channel: 7 in (17.78 cm); Thickness: .25 in (.64 cm) |
| Tongue Extension | Standard |
| Tongue Description | Z Channel: 7 in (17.78 cm); Thickness: .25 in (.64 cm) |
| Tires - Option One | 215/75R16C |
| Axle/Suspension | Torsion axle |
| Capacity - Option One | 7,716.2 lbs (3,500 kg) |
| Manufacturer - Option One | China |
| Type - Option One | Rubber torsional |
| Wheels - Option One | RIM6Jx16 |
| Trailer Light Type | LED |
| Brake Type | Parking brake |
| Rotation Type | Manual |
| Rotational Lock | Yes |
| Chute Rotation Angle | 270 deg |
| Chute Height | 91 in |
LITERATURE
BC1000SV Spec Sheet
SEE IT IN ACTION
