Home / RTX750 SOC Ride-on Tractor

RTX750 SOC Ride-on Tractor

Facilitate a productive utility installation process

  • Adjustable height for convenient transportation
  • Work in narrow jobsites
  • Optimal operator comfort
  • Facilitates operator training
  • Minimize premature engine wear

FEATURES & BENEFITS

Integrated system display

An integrated system display toggles through machine diagnostics including engine rpm, fuel, alternator voltage, engine water temperature and engine hours. When in either ground drive or using a rear attachment, the display indicates the percentage of the hydrostatic capacity being utilized. This allows the operator to monitor important machine functions. The capability to monitor the percentage of the hydrostatic capacity being used is especially useful when training new operators.

Loadout conveyor attachment

The loadout conveyor attachment can work with up to 10-tonnes (9.07-tons) dump truck. It enables operators to work in tight, urban areas with the spoil feeding directly into the dump truck.

Rotating operator's station

The operator’s station and all attachment controls manually rotate 90 degrees. The swiveling operator’s station is designed to optimize operator visibility of the rear attachment and maximize operator comfort.

Sliding offset trencher attachment

The trencher attachment in this RTX750 SOC can cut a 61-cm (24-in) wide by 91-cm (36-in) deep trench. The sliding trencher moves from the center to 41-cm (16-in) to the left. It facilitates the digging of clean, straight ditch walls for efficient utility installations. The height can also be adjusted for convenient transportation.

TrenchSense™ electronic control system

While trenching in auto creep mode, the TrenchSense™ electronic control system actively monitors engine rpm. If difficult ground conditions are encountered, causing a sudden drop in engine rpm or the trencher chain to stop, the tractor automatically pauses forward creep and slightly backs up. The trencher chain also slightly reverses to dislodge any material. Once the engine recovers the previously set engine rpm, forward trencher chain motion and forward creep automatically resume. By eliminating the need to return controls to neutral and restart, productivity can be maximized. Avoiding abrupt engine stop can also help reduce premature engine wear.

SPECIFICATIONS

General Dimensions and Weights
Weight (basic tractor, rubber tires) 6200 lbs
Length (basic tractor, rubber tires) 97.3 in
Width (basic tractor, rubber tires) 73.4 in
Height (basic tractor, rubber tires) 96.8 in
Wheel Base (Centerline of Axles) 61 in
Tread Width with Rubber Tires (Centerline to Centerline) 63.4 in
Ground Clearance (rubber tires) 8.8 in
Angle of approach (basic tractor, rubber tires) 25 deg
Roll Over Protection Structure (Open Cab) 17000 lbs
Engine - Option one
Make and Model Deutz TD2.9L4
Maximum Torque 192 ft-lb
Number of Cylinders 4
Maximum Operating Angle (Fore/Aft)* 25 deg
Maximum Operating Angle (Left/Right)* 25 deg
Fuel Type Diesel
Emissions rating Tier 4 Final
CE approved Yes
Guaranteed sound power (CE-rating) 110 dB(A)
Noise Level at Operator's Ear 94 dB(A)
Gross Horsepower (Maximum) 74 hp
Horsepower at Maximum RPM (Gross) 66.6 hp
Cooling Method Liquid
Aspiration Turbo
Max Fuel Consumption 3.9 gph
Maximum Engine RPM 2600 rpm
Idle Speed 1000 rpm
Rated RPM 2600 rpm
Engine - Option two
Make and Model Kohler ECH749
Maximum Torque 40 ft-lb
Number of Cylinders 2
Cooling Medium Air
Maximum Operating Angle (Fore/Aft)* 25 deg
Maximum Operating Angle (Left/Right)* 25 deg
Fuel Type Gasoline
Emissions rating China, EPA, ARB, EU Stage 5
CE approved Yes
Guaranteed sound power (CE-rating) 110 dB(A)
Noise Level at Operator's Ear 94 dB(A)
Gross Horsepower 26.5 hp
Maximum Engine RPM 3500 rpm
Idle Speed 1800 rpm
Rated RPM 3400 rpm
Net Horsepower 25.5 hp
Displacement 45 cu-in
Cooling Method Air
Aspiration Natural
Max Fuel Consumption 1.9 gph
Air Cleaner Dry 2-stage with safety
Run Time at Full Load (hours) 4.7 hr
Hydraulic System
Ground drive pump capacity 35 gpm
Ground drive pump relief 4350 psi
Attachment pump capacity 35 gpm
Attachment pump relief 5500 psi
Auxiliary pump capacity 19.4 gpm
Auxiliary pump relief 2500 psi
Capacities
Fuel Tank 27 gal
Hydraulic Tank 18 gal
Hydraulic System 25 gal
Coolant 3 gal
Ground Drive - Rubber Tire
Maximum forward transport speed (high) 4 mph
Maximum reverse transport speed (high) 4 mph
Tire size 30 in x 10 in (76.2 cm x 25.4 cm) - 16 in (40.6 cm)
Maximum forward creep speed (low) 1.6 mph
Maximum reverse creep speed (low) 1.5 mph
Axle Options
Front Axle Type Steerable planetary with hydraulic differential lock
Rear Axle Type Steerable planetary with hydraulic differential lock
Axle load rating (static, per axle) 11250 lbs
Outside Turning Diameter (Rubber Tires, Front Steer Only) 33.3 ft
Outside Turning Diameter (Rubber Tires, Front and Rear Steer) 16.8 ft
Service Brake Type Hydrostatic
Parking Brake Type Spring-applied, hydraulic release
Electrical System
System Voltage 12 volt
Battery CCA Rating 950
Battery Group Class Group 31

SEE IT IN ACTION

COB
Image 1
COB
Image 1

TALK TO A VERMEER DEALER TODAY

From helping you select the right equipment, to training operators, to providing the parts and service you need on a jobsite or in the field, Vermeer dealers will give you the localized support you’re looking for.