BC1000S Brush Chipper
Durable equipment for tough wood debris-clearing and processing jobs.
- Reduced noise and fuel consumption
- Enhanced application versatility
- Greater feeding efficiency
- Operator safety in mind
- Enhanced productivity
- Improved durability of belt-drive system
- User-friendly digital display interface
FEATURES & BENEFITS
72-hp (53.7-kW) Cummins QSF2.8 turbo engine/EcoIdle™ engine control system
Aids in minimizing noise and fuel consumption, especially if there are frequent interruptions in the feeding process.
Bottom-feed stop bar
With operator safety in mind, the bottom stop feed bar is strategically located to make it possible for an operator to strike the bar and shut off the feed mechanism.
Clutchless PTO
Allows the PTO to only be engaged while the engine is at low/idle rpm.
Large infeed opening of 12-in tall x 17-in wide (30.5 cm x 43.2 cm)
Helps maximize productivity by minimizing the need to trim material before feeding it into the chipper.
Multifunctional digital instrument
Makes it convenient to check engine-related information.
Optional four-knife drum
Exclusively developed by Vermeer Tianjin Manufacturing, the optional four-knife drum produces small, fine wood chips of approximately 0.4 in - 0.6 in (10 mm - 15 mm) in size.
SmartFeed control system
Helps maximize operator productivity and minimizes strain on vital motor parts.
SPECIFICATIONS
Engine - Option one
| Oil Filter | Spin On |
| Make and Model | Cummins QSF2.8 Turbo |
| Clutch Drive Engagement | Belt tensioner |
| Maximum Angle of Continuous Operation | 30 deg |
| Fan | F490W-25.4-60-7 |
| Coolant Capacity (Engine and Radiator) | 2.3 gal |
| Clutch Type | Clutchless PTO |
| Gross Horsepower (Maximum) | 72 hp |
| Cooling Medium | Liquid |
| Fuel Tank Capacity | 25 gal |
| Torque (Max) | 184.4 ft-lb |
| Recommended Oil | API CH4 |
| Air Cleaner | 2-Stage Dry |
| Number of Cylinders | 4 |
| Oil Volume with Filter | 8.5 qt |
| Fuel Type | Diesel |
Feed System
| Number of Knives | 2 |
| Feed Roller Dimension | 21 in (51 cm) |
| Motor Manufacturer | White |
| Number of Feed Roller Motors | 1 |
| Feed Roller Orientation | Single horizontal |
| Number of Feed Rollers | 1 |
| Pinch Point - Distance to End of Feed Table | 66.5 in |
| Motor Displacement | 28.3 |
| Infeed Hopper Height | 12 in |
| Number of Knives (2) | 4 |
| Feed Roller Minimum Distance to Drum | 1 in |
| Weight of Feed Roller | 400 lbs |
| Infeed Table Length | 32 in |
| Infeed Throat Capacity | 12 in x 17 in (30.5 cm x 43.2 cm) |
| Feed Speed | 105 ft/min |
| Infeed Table Width | 52 in |
| Infeed Table Material Thickness | .2 in |
| Distance from Feed Table to Ground | 26 in |
| Feed Roller Clamp Load | 350 lbs |
Drum/Disc Cutting System
| Bedknife - Number of Useable Edges | 4 |
| Bedknife Size | 3.5 in x 17.25 in (8.89 cm x 43.82 cm) |
| Weight With Shaft | 460 lbs |
| Thickness | .4 in |
| Diameter | 20 in |
| Fixture Method | Weld On |
| Number of Paddles | 3 |
| Number of Knives | 2 |
| Knife Size | .625 in x 4.5 in x 9 in (1.59 cm x 11.43 cm x 22.86 cm) |
| Safety Lock - Number of Positions | 2 |
| Speed | 2264 rpm |
| Replaceable Threaded Knife Block | Yes |
| Number of Bolts/Knife | 4 |
| Useable Edges | 4,43.8*8.9*2.5 |
| Width | 20 in |
| Bedknife Thickness | 1 in |
| Bedknife Material | 1018 |
| Material Capacity | 12 in |
| Knife Thickness | .6 in |
| Material | A8 chipper steel |
General Dimensions and Weights
| Weight - Engine Option One | 6063 lbs |
| Sound Power | 118 dB(a) |
| Height | 100.8 in |
| Width | 68.9 in |
| Weight (without winch and hydraulic jack) | 6063 lbs |
| Length - Feed Table Up, Tongue In | 177.2 in |
Safety System
| Four Position Feed Control Bar | Standard |
| Bottom Feed Stop Bar | Standard |
| Green Hold to Run Button | Standard |
| Reset Method | Dual green hold-to-run buttons |
| Reduced Sensitivity | 12 deg |
| Normal Sensitivity | 22 deg |
| Actuation Force (BFSB) | 34 lbs |
| Actuation Force | 34 lbs |
| Bottom Feed Stop Bar Diameter | 2 in |
| Positions | Four positions: E-stop, Forward, Stop, Reverse |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
Cutter Drive Components - Engine Option One
| Manufacturer | Linkbelt |
| Dynamic Capacity | 31400 lbs |
| Belt Idler/Tensioner | Yes |
| Belt Type | 5 V |
| Bore | 2.4 in |
| Type | Spherical rollers |
| Number of Bearings | 2 |
| Static Capacity | 53500 lbs |
Hydraulic System
| Filtration Method | 10 micron return; 100 micro suction |
| Oil Cooler | No |
| Directional Control | Yes |
| System relief pressure | 2500 psi |
| Tank capacity | 7 gal |
| Recommended Oil Type | VMF Vermeer |
| System Type | Open center |
| Pump Flow at Maximum RPM | 2.7 gpm |
Electrical System
| Radio Remote Control | No |
| Switches | Droop and toggle switches |
| Battery | 31-950 |
| Standard Gauges | Fuel and hour gauges |
| System Voltage | 12 volt |
| Display | LED |
| Controller | Vermeer ACS |
| Shutdown System | High temperature, low pressure |
Chassis
| Fender Description | Steel bolt-on |
| Frame Description | Z Channel: 7 in (17.78 cm), Thickness: .25 in (.64 cm) |
| Tongue Extension | Standard |
| Tongue Description | Z Channel: 7 in (17.78 cm), Thickness: .25 in (.64 cm) |
| Tires - Option One | 215/75R16C |
| Axle/Suspension | Torsion axle |
| Capacity - Option One | 7716.2 lb (3500 kg) |
| Manufacturer - Option One | China |
| Type - Option One | Rubber torsional |
| Wheels - Option One | RIM6Jx16 |
| Trailer Light Type | LED |
| Brake Type | Parking brake |
Discharge System
| Rotation Type | Chain drive manual crank with pin lock |
| Rotational Lock | Yes |
| Chute Rotation Angle | 270 deg |
| Chute Height | 96.9 in |
LITERATURE
BC1000S Spec Sheet
SEE IT IN ACTION
