D60S HDD
A drill designed specifically for operators in developing nations.
- Improved drilling precision and reliability
- Powerful torque and thrust
- Modest footprint
- Enhanced drilling efficiency
- Facilitates hassle-free maintenance
- Cut down on manual labor
FEATURES & BENEFITS
Ease of serviceability
The D60S engine hood can pivot and is only one piece. This design provides convenient access to internal components for ease of serviceability and maintenance checks.
Impressive footprint
The D60S comes with a standard remote control for ease of use that helps you efficiently load and unload the drill. A modest footprint of just 100-in (254-cm) transport width and 26-ft (7.9-m) length allows the D60S to fit a range of installation specifications — even congested urban jobsites.
Operator-controlled rod loader
The operator-controlled rod loader helps reduce the labor involved with manually loading and unloading drill rod, which also assists in increasing overall drilling efficiency. With an added rod function, single rods can be loaded quickly instead of changing the rod box.
Powerful torque and thrust
With an overall increase in power and torque, the D60S is one of the most powerful drills in its class. It has up to 60,000 lb (266.9 kN) of thrust and pullback and 9,000 ft-lb (12,202.4 Nm) of rotational torque, allowing operators to maximize their efficiency and productivity.
Three-speed gearbox
The three-speed gearbox helps improve overall drilling efficiency by allowing the operator to adjust the machine’s rotational torque to match different ground conditions.
Upgraded Plus+1 control system
For precision and reliability, the control system in the D60S has been upgraded to Plus+1 software. This drill also includes the AutoSteer system, which automates certain drill head motions, helping you to set and adjust rotation duration and direction while maintaining a pre-set thrust pressure to get through hard ground conditions, enabling drilling consistency. To top it off, the updated console design helps provide a seamless, user-friendly bore path adjustment experience for the operator.
SPECIFICATIONS
| Thrust/Pullback Pump Relief Pressure | 5650 psi |
| Thrust/Pullback Pump Flow at Max Engine RPM | 427.2 gpm |
| Rotation Pump Relief Pressure | 6100 psi |
| Rotation Pump Flow at Maximum Engine RPM | 57 gpm |
| Auxiliary Pump Relief Pressure | 420 psi |
| Auxiliary Pump Flow at Maximum Engine RPM | 11.4 gpm |
| Hydraulic Supply Filter Rating | 200 mesh |
| Hydraulic Return Filter Rating | 10 mesh |
| Maximum Spindle Speed at Max Engine RPM | 210 rpm |
| Maximum Spindle Torque (High at Maximum Engine RPM) | 4500 ft-lb |
| Maximum Spindle Torque (Medium at Maximum Engine RPM) | 6700 ft-lb |
| Drill Rack Angle | 16 deg |
| Maximum Ground Drive Speed at Maximum Engine RPM | 2.7 mph |
| Maximum Carriage Speed at Maximum Engine RPM | 131 ft/min |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 9000 ft-lb |
| Maximum Carriage Speed in Low at Maximum Engine RPM | 65 ft/min |
| Noise Level at Operator's Ear | 83.9 dB(A) |
| Guaranteed sound power (CE-rating) | 114.3 dB(A) |
| Thrust | 60000 lbs |
| Pullback | 60000 lbs |
| Maximum Spindle Speed (Low at Maximum Engine RPM) | 96 rpm |
| Maximum Spindle Speed (Medium at Maximum Engine RPM) | 136 rpm |
| Maximum Pressure | 1305 psi |
| Maximum Flow | 130 gpm |
| Brand | FMC |
| Make and Model | Dong Feng Cummins (QSB6.7-C190) |
| Gross Horsepower | 190 hp |
| Maximum Engine RPM | 2200 rpm |
| Idle Speed | 900 rpm |
| Rated RPM | 2200 rpm |
| Fuel Tank | 64 gal |
| Hydraulic Tank | 85 gal |
| Hydraulic System | 85 gal |
| Weight | 24300 lbs |
| Angle of Approach | 15 deg |
| Length (Minimum Transport) | 325.2 in |
| Width (Minimum Transport) | 91.2 in |
| Width (With Cab, Minimum Transport) | 91.2 in |
| Height (Minimum Transport) | 90 in |
| Height (With Cab) | 104.4 in |
| Drill Rod Thread | Vermeer Rod |
| Thread Type | 2-7/8FSTI |
| Length | 15 ft |
| Rod Diameter | 2.9 in (7.3 cm) |
| Weight | 165 lbs |
SEE IT IN ACTION
