WC2500XL Whole Tree Chipper
Expand your revenue stream with the WC2500XL whole tree chipper.
- Expand your revenue stream with more flexibility
- Designed with the operator in mind
- Focus more on productivity and less on maintenance
FEATURES & BENEFITS
Compact design
The WC2500XL has a compact design to aid in maneuvering in the woods, on tight jobsites and down narrow roads, but packs 600 hp (448 kW) of power to meet your production demands.
Easy knife change-out
Knife setup is fast and easy. Knife position is set with two small bolts — no babbiting needed. Bite size is adjustable in 1/8 in (.3 cm) increments from 1/8 in (3 mm) up to 5/8 in (16 mm) via shims. Makes knife change-out on the jobsite easy and helps reduce cost of operation.
Replaceable wear parts
High-wear material flow areas of the machine — such as the drum, discharge chute, cutter housing and infeed conveyor floor — are designed with replaceable bolt-in wear parts to extend machine life.
Self-adjusting hydraulic dry clutch
Self-adjusting, push-button, hydraulic dry clutch provides consistent engagement — helping to prolong clutch life, lower maintenance costs and reduce operator error.
SmartCrush and variable-speed, dual-infeed conveyor chains
With SmartCrush technology that automatically increases down pressure when difficult material enters the cutting drum, and variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine — not pushing the material through.
Variable chip sizes
Microchip drum produces a variety of sizes between 1/8 in (3 mm) to 5/8 in (16 mm) chips.
SPECIFICATIONS
| Maximum Width (Transport) | 108 in |
| Weight | 38000 lbs |
| Tongue Weight | 7500 lbs |
| Sound Power | 121 |
| Maximum Length (Operation) | 29.8 ft |
| Maximum Length - Transport | 29.8 ft |
| Maximum Height (Transport) | 10.9 ft |
| Make and Model | Cummins QSX15 Tier 4 Final |
| Gross Horsepower (Maximum) | 600 hp |
| Torque (Max) | 2050 ft-lb |
| Fuel Tank Capacity | 200 gal |
| Max Fuel Consumption | 31 gph |
| Fuel Type | Ultra-low sulfur diesel |
| Air Cleaner | Two-stage direct flow |
| Oil Filter | Spin-on |
| Recommended Oil | CES 20078 or 20081 |
| Oil Volume with Filter | 52 qt |
| Maximum Angle of Continuous Operation | 31 deg |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 23 gal |
| Alternator | 105 |
| Fan | Reversible |
| Clutch Type | PT Tech electronically controlled dry |
| Clutch Drive Engagement | Hydraulic |
| Number of Cylinders | 6 |
| Material Capacity | 25 in |
| Thickness | .5 in |
| Width | 34 in |
| Diameter | 36 in |
| Speed | 1169 rpm |
| Weight With Shaft | 3163 lbs |
| Safety Lock - Number of Positions | 4 |
| Type | Adjustable |
| Knife Thickness | .6 in |
| Material | A8 chipper steel |
| Useable Edges | 1 |
| Knife Size | 17 |
| Number of Bolts/Knife | 5 |
| Replaceable Threaded Knife Block | Hex nut |
| Fixture Method | Bolt |
| Bedknife Size | 34" wide |
| Bedknife Thickness | 1.5 in |
| Bedknife Material | Cold-formed low-carbon bar |
| Bedknife - Number of Useable Edges | 2 |
| Number of Pockets | 4 |
| Replaceable Wear Plates | Yes |
| Number of Replaceable Wear Plates | 8 |
| Number of Bearings | 2 |
| Bore | 5.4 in |
| Type | Pillow block |
| Manufacturer | Dodge |
| Dynamic Capacity | 166000 lbs |
| Static Capacity | 236000 lbs |
| Belt Idler/Tensioner | Slide engine |
| Belt Type | 12 rib 5 V |
| Chute Height | 132 in |
| Bottom Thickness | .1 in |
| Top Thickness | .2 in |
| Side Wall Thickness | .2 in |
| Deflector Thickness | .2 in |
| Rotation Type | Hydraulic |
| Rotational Lock | Hydraulic |
| Bottom Replaceable Wear Plate | AR 400 |
| Wear Plate Thickness | .2 in |
| Side Deflector Angle | 14 deg |
| Up Deflector Angle | 22 deg |
| Down Deflector Angle | 14 deg |
| Tank capacity | 33 gal |
| Recommended Oil Type | Hy-Power 68, 46, or 32 |
| System Type | Open-center |
| Filtration Method | Intake suction screens and return filter |
| Pump Flow at Maximum RPM | 16 gpm |
| System relief pressure | 4000 psi |
| Auto Reverse PSI | 3750 psi |
| Flow Control | Two - feed roller and infeed conveyor |
| Oil Cooler | 1 |
| System Voltage | 24V |
| Battery | Group 8D 1400 CCA (dual) |
| Standard Gauges | Yes |
| Deluxe Gauges | No |
| Switches | Push button |
| Controller | Danfoss MC-050 |
| Display | DP10 |
| Shutdown System | Yes |
| Radio Remote Control | Yes |
| Frame Description | 10" x 4" x .375" wall rectangular tubing |
| Toolbox Description | Lockable |
| Tongue Description | Fixed with skidder grab |
| Tongue Extension | None |
| Hitch Type | Pintle |
| Fender Description | Jeep style (steel) |
| Axle/Suspension | Tandem axles |
| Type | Leaf spring |
| Manufacturer | Dexter |
| Capacity | 18740 |
| Tires | 385/65R22.5 Super Single |
| Brake Type | Air |
| Trailer Light Type | LED |
| Grapple Handle | 30" wide |
| Wheels | 22.5 x 14 aluminum |
| Special Paint | Yes |
| Extended Warranty | Yes |
| Preventative Maintenance | Yes |
| Adjustable Height Discharge Chute | No |
| Feed Table Width | 98 in |
| Feed Table Length - Option One | 10 ft |
| Feed Conveyor Type | Dual independent chain |
| Material Construction | .50" thick |
| Infeed Slope | 6 deg |
| Number of Infeed Chains | 2 |
| Infeed Roller Width | 34 in |
| Maximum Feed Height | 27 in |
| Infeed Roller Weight | 575 lbs |
| Infeed Roller Diameter | 28 in |
| Tooth Design | Straight knives |
| Drive Motor | WS-series |
| Drive Planetary | Auburn Model 9 |
| Feed Roller Down Pressure | 1530 |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | One upper, one conveyor |
| Number of Knives | 12 |
| Drive Displacement | 6.9 cu-in |
| Drive Manufacturer | White |
| Feed Roller Distance to Drum | 1 in |
| Feed Roller Speed | 98 ft/min |
SEE IT IN ACTION
