Home / WC2500TX Whole Tree Chipper

WC2500TX Whole Tree Chipper

Tracked undercarriage allows you to maneuver in the woods and tough land-clearing sites.

Enhanced maneuverability wherever the job may take you
Productivity and versatility to complete the job
User-friendly operation for confidence on the job

FEATURES & BENEFITS

Compact design

The WC2500TX has a compact design to aid in maneuvering in the woods and land-clearing sites, but packs 600 hp (448 kW) of power to meet your production demands.

Easy knife change-out

Knife setup is fast and easy. Knife position is set with two small bolts — no babbiting needed. Bite size is adjustable in 1/8 in (3 mm) increments from 1/8 in (3 mm) up to 1.25 in (32 mm) via shims. Makes knife change-out on the jobsite easy to help reduce cost of operation.

Replaceable wear parts

High-wear material flow areas of the machine — such as the drum, discharge chute, cutter housing and infeed conveyor floor — are designed with replaceable bolt-in wear parts to extend machine life.

Self-adjusting hydraulic dry clutch

Self-adjusting, push-button, hydraulic dry clutch provides consistent engagement — helping to prolong clutch life, lower maintenance costs and reduce risk of damage by operator.

SmartCrush and variable-speed, dual-infeed conveyor chains

With SmartCrush technology that automatically increases down pressure when difficult material enters the cutting drum, and variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine — not pushing the material through.

Variable chip sizes

The microchip drum produces a variety of sizes between 1/8 in (3 mm) to 5/8 in (16 mm) chips, while the macrochip drum produces chip sizes between 5/8 in (16 mm) and 1.25 in (32 mm).

SPECIFICATIONS

General Dimensions and Weights

Maximum Width (Transport)	118 in
Weight - Engine Option Two	48500 lbs
Sound Power	122
Maximum Length (Operation)	28.4 ft
Maximum Length - Transport	26.1 ft
Maximum Height (Transport)	11.6 ft

Engine - Option one

Make and Model	Cummins QSX15 Tier 4 Final
Gross Horsepower (Maximum)	600 hp
Torque (Max)	2050 ft-lb
Fuel Tank Capacity	200 gal
Max Fuel Consumption	31 gph
Fuel Type	Ultra-low sulfur diesel
Air Cleaner	Two-stage direct flow
Oil Filter	Spin-on
Recommended Oil	CES 20078 or 20081
Oil Volume with Filter	52 qt
Maximum Angle of Continuous Operation	45 deg
Cooling Medium	Liquid
Coolant Capacity (Engine and Radiator)	23 gal
Alternator	105
Fan	Reversible
Clutch Type	PT Tech electronically controlled dry
Clutch Drive Engagement	Hydraulic
Number of Cylinders	6

Engine - Option two

Make and Model	Cummins QSX15 Tier 3
Number of Cylinders	6
Gross Horsepower (Maximum)	600 hp
Torque (Maximum)	1875 ft-lb
Fuel Tank Capacity	200 gal
Max Fuel Consumption	31 gph
Fuel Type	Ultra-low sulfur diesel
Air Cleaner	Two-stage direct flow
Oil Filter	Spin-on
Recommended Oil	CES 20078 or 20081
Oil Volume with Filter	52 qt
Maximum Angle of Continuous Operation	45 deg
Cooling Medium	Liquid
Coolant Capacity (Engine and Radiator)	23 gal
Alternator	100
Fan	Reversible
Clutch Type	PT Tech electronically controlled dry
Clutch Drive Engagement	Hydraulic

Drum/Disc Cutting System

Material Capacity	25 in
Thickness	.5 in
Width	34 in
Diameter	36 in
Speed	1169 rpm
Weight With Shaft	3163 lbs
Safety Lock - Number of Positions	2 to 4
Type	Adjustable
Knife Thickness	.6 in
Material	A8 chipper steel
Useable Edges	1
Knife Size	8.5 or 17
Number of Bolts/Knife	4 or 5
Replaceable Threaded Knife Block	Hex nut
Fixture Method	Bolt
Bedknife Size	34" wide
Bedknife Thickness	1.5 in
Bedknife Material	Cold-formed low-carbon bar
Bedknife - Number of Useable Edges	2
Number of Pockets	2 or 4
Replaceable Wear Plates	Yes
Number of Replaceable Wear Plates	8

Cutter Drive Components - Engine Option One

Number of Bearings	2
Bore	5.4 in
Type	Pillow block
Manufacturer	Dodge
Dynamic Capacity	166000 lbs
Static Capacity	236000 lbs
Belt Idler/Tensioner	Slide engine
Belt Type	12 rib 5 V

Discharge System

Chute Height	132 in
Bottom Thickness	.1 in
Top Thickness	.2 in
Side Wall Thickness	.2 in
Deflector Thickness	.2 in
Rotation Type	Hydraulic
Rotational Lock	Hydraulic
Bottom Replaceable Wear Plate	AR 400
Wear Plate Thickness	.2 in
Side Deflector Angle	14 deg
Up Deflector Angle	22 deg
Down Deflector Angle	14 deg

Hydraulic System

Tank capacity	33 gal
Recommended Oil Type	Hy-Power 68, 46, or 32
System Type	Open-center
Filtration Method	Intake suction screens and return filter
Pump Flow at Maximum RPM	16 gpm
System relief pressure	4000 psi
Auto Reverse PSI	3750 psi
Flow Control	Two - feed roller and infeed conveyor
Oil Cooler	1

Electrical System

System Voltage	24V
Battery	Group 8D 1400 CCA (dual)
Standard Gauges	Yes
Deluxe Gauges	No
Switches	Push button
Controller	Danfoss MC-050
Display	DP10
Shutdown System	Yes
Radio Remote Control	Yes

Chassis

Frame Description	8" x 4" x .375" wall rectangular tubing
Toolbox Description	Lockable
Brake Type	Air
Trailer Light Type	LED
Track pad width	20 in
Ground pressure	8.4 psi
Track Gauge	97 in
Track Pitch	132 in

Other Options

Special Paint	Yes
Extended Warranty	Yes
Adjustable Height Discharge Chute	No

Infeed Conveyor

Feed Table Width	98 in
Feed Table Length - Option One	10 ft
Feed Conveyor Type	Dual independent chain
Material Construction	.50" thick
Infeed Floor Construction	AR400 wear plate
Infeed Slope	6 deg
Number of Infeed Chains	2
Replaceable Chain Slides	Yes

Standard Infeed System

Infeed Roller Width	34 in
Maximum Feed Height	27 in
Infeed Roller Weight	575 lbs
Infeed Roller Diameter	28 in
Tooth Design	Straight knives
Drive Motor	WS-series
Drive Planetary	Auburn Model 9
Feed Roller Down Pressure	1530
Feed Roller Orientation	Horizontal
Number of Feed Rollers	One upper, one conveyor
Number of Knives	12
Drive Displacement	6.9 cu-in
Drive Manufacturer	White
Feed Roller Distance to Drum	1 in
Feed Roller Speed	98 ft/min

Discharge System 2 - Top Load

Chute Height	194.5 in
Bottom Thickness	.1 in
Wear Plate Thickness	.2 in
Top Thickness	.2 in
Side Wall Thickness	.2 in
Deflector Thickness	.2 in
Up Deflector Angle	18 deg
Down Deflector Angle	90 deg