TR5300 Trommel Screen
Ideal for operations where high productivity in a compact size is demanded.
- High productivity in a compact size
- Minimize overall maintenance time
- Complete control for overall jobsite confidence
FEATURES & BENEFITS
Added rigidity to screens
With the ability to tension the screen around the drum, operators can add rigidity to the screens. This design allows the use of smaller gauge wire, ultimately increasing the open area of the screen to help improve productivity.
Advanced controls
Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handdeld transceiver remote.
Easy access to trommel drum
A set of dual-hinged doors on both sides of the machine expose the full length of the trommel drum for ground level service and removal.
Hydraulic-driven chain drive system
A hydraulic-driven chain drive system allows the drum to be lifted off the cog for service, and bolt-on sprockets can be changed quickly to help lower repair time.
Large, low-feed hopper
The TR5300 features a large, low-feed hopper that makes it easier to load with a loading ramp, making the trommel screen more mobile around the jobsite
On-machine or remote control options
Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote. From either control, the operator can choose from four programmable presets or adjust machine settings based on incoming material.
SPECIFICATIONS
| Conveyor Belt Width | 36 in |
| Conveyor Operation | 17 gpm |
| Conveyor Motor Displacement | 33 cu-in |
| Troughing Idler Type | 20° CEMA "B" with permanently sealed bearings |
| Fines Conveyor Length | 55 ft |
| Conveyor Belt Type | 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option |
| Conveyor Belt Stacking Height | 15' |
| Fines Conveyor Frame | 2" (5.1 cm) x 8" (20.3 cm) structural steel tubing |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (96.5 cm) wide |
| Maximum Fines Belt Speed | 500 ft/min |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Self-Cleaning Return Idlers | 4" (10.2 cm) rubber disc, qty 8 |
| Head Pulley Bearing | 2 7/16" (6.2 cm) pillow block |
| Head Pulley Takeup | 10 in |
| Brush Assembly Support | Two 1.25" (3.2 cm) sealed ball bearings |
| Bristle Material | Polyethylene |
| Brush Diameter | 14 in |
| Maximum Variable Overs Belt Speed | 350 ft/min |
| Head Pulley Bearing | 2 7/16" (6.2 cm) pillow block |
| Overs Conveyor Length | 10.5 ft |
| Conveyor Belt Type | 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option |
| Conveyor Belt Size | 36 |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Conveyor Belt Stacking Height | 6' |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Capacity | 20000 lbs |
| Axle/Suspension | Single Leaf Sprung |
| Tires - Option One | 445/50R22.5 |
| Frame Description | Heavy Duty Structural Tubing |
| Weight | 32000 lbs |
| Transport Height | 13.4 ft |
| Operation Width | 112.8 in |
| Transport Width | 98.4 in |
| Operation Height | 15 ft |
| Hitch Weight | 11600 lbs |
| Transport Length | 39 ft |
| Operation Length | 89.9 ft |
| Capacity | 100 cu yd (76.5 m3) per hr with .5" (12.7 mm) screens installed and material with moisture less than 40% |
| Tank capacity | 55 gal |
| Drum Operation | 0-30.9 gpm (0-117.0 L/min) |
| Thrust Bearing Face | 2.9 in |
| Drum Speed | 0-24 RPM |
| Maximum Screen Panels | 4 |
| Thrust Bearing Diameter | 4 in |
| Drum Diameter | 5 ft |
| Drum Angle Adjustability | 0-7 degrees |
| Drum Drive Chain | 140 custom extended pin |
| Drum Support Description | Eight poly trunnion rollers 8" (20.3 cm) diameter 4" (10.2 cm) width |
| Drum Length | 15 ft |
| Hopper Height | 9.5 |
| Hopper Opening | 34x37 |
| Hopper Bottom Width | 34 in |
| Hopper Capacity | 5.5 cu yd |
| Make and Model | Deutz TD2.9L Tier 4 Final/ Stage IV |
| Number of Cylinders | 4 |
| Engine Rating | 74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm |
| Fuel Tank Capacity | 44 gal |
| Fuel Consumption | 4.6 |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 30 deg |
| Battery | 950 Cold Cranking Amp Group 31 |
| Oil Filter | Spin-on |
| Recommended Oil | Mobil 15W40 |
| Oil Volume with Filter | 8.4 qt |
| System Voltage | 12 |
| Air Cleaner | Dual element |
| Radiator Fan | Suction |
SEE IT IN ACTION
