T1655III Surface Miner
Combining productivity, precision and optimum operator comfort.
- Dual Cat® engines deliver 1,200 hp (895 kW) to the machine
- Smooth, quiet ride for the operator in the typically harsh environment of a mining operation
- Conduct surface mining extraction, remove ground surface, or create a smooth, level area for site preparation
FEATURES & BENEFITS
Improved efficiencies
Drive motors attached directly to the cutter drum improve efficiencies and reduce wear costs associated with chain, sprocket and belt transmissions.
Mobility and stability
The T1655III dual tracks and low center of gravity allow for maneuverability and stability over the changing and diverse surface conditions.
Patented tilt attachment
The patented tilt attachment tilts 5 degrees in either direction allowing for cutting to grade and a smooth pit floor.
SmartTEC electronic control system
SmartTEC performance monitoring assists operators with adjustments to machine controls to help improve efficiency and tracks the operational performance of the machine on a consistent platform across all machine models.
Top-down cutting
Top-down cutting, as developed by Vermeer, allows the cutter teeth to gain penetration without using the machine’s tractive effort to drive the teeth into the material.
Vantage track
Relax in the confidence that your investment is protected and your enture closed-loop hydrostatic system is covered with either an optional 3-year/3000 or 5-year/5000 hour extended care service program.
SPECIFICATIONS
| Approach Angle | 15 deg |
| Height Range | 201 in (510.5 cm) not including handrails |
| Weight Range | 410,000 lb (185,972.9 kg) |
| Width Ranges | 20.4' (6.2 m) - with Terrain Leveler attachment |
| Track Length | 215.6 in |
| Tilt Track Available | No |
| Auto Self Level | No |
| Service Brakes | Hydrostatic |
| Track Pad Type | Double grouser with dirt relief |
| Track Size | Berco Hitachi EX1100 |
| Parking and Emergency Brake | Wet disc, spring-applied hydraulic release |
| Track Drive Type | Dual path hydrostatic planetary transmission |
| Track Pad Width Ranges | 36" |
| Maximum Ground Speed - High | 103.9 ft/min |
| Maximum Ground Speed - Low | 45.7 ft/min |
| Ground Pressure Minimum | 25.8 psi |
| Ground Pressure Maximum | 25.8 psi |
| Air Conditioner/Heater | Yes, two units |
| Air Suspension Seat | Yes, two units |
| Elevating | Yes |
| Pressurized/Filtered Air | Yes |
| Rollover Protective Structure (ROPM) | Yes |
| AM/FM Stereo with Weather Band | Yes |
| Cab | Yes |
| Control System | TEC Plus with SmartTEC |
| Pressure Setting | 2500 psi |
| Oil Tank Capacity | 440 gal |
| Pump Flow at Maximum RPM | 66.4 gpm |
| Pump Type | Pressure- and flow-compensated |
| Oil Type | HyPower 68, HyPower 100, Hy Power 1100 |
| Trencher | No |
| Terrain Leveler | Yes |
| Rockwheel | No |
| Bucket Wheel | No |
| Terrain Leveler cutting width | 180 in |
| Make and Model | 2 - Caterpillar C-18 engines ACERT Tier 3 |
| Gross Horsepower | 1200 hp |
| Rated Engine RPM | 1800 |
| Fuel Tank Capacity | 800 gal |
| Operating Range | 13.2 hours |
| Fuel Consumption at Full Load | 60.5 gph |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 35 deg |
| Air Cleaner | Dry-type with precleaner |
| Aspiration | Turbo charged and aftercooled |
| Cooling Medium | Liquid |
| Electrical System | 24 volt |
| Oil Filter | Full Flow |
SEE IT IN ACTION
