SC70TX Stump Cutter
Tough enough to withstand large stumps on a commercial jobsite.
- Productivity powerhouse
- Maximized power delivery at the stump
- Mobility and jobsite flexibility that professionals love
FEATURES & BENEFITS
Gearbox drive cutter wheel system
Gearbox drive cutter wheel system directs the maximum amount of horsepower to the cutter wheel for optimal jobsite productivity.
Ground drive speed
The ground drive speed helps transport the machine between stumps to increase productivity on the job.
Operator presence system
The operator presence system allows the cutter wheel to automatically stop when the operator releases the hydraulic cutter wheel controls.
SmartSweep™ control system
The SmartSweep™ control system helps improve efficiency and productivity at the stump while helping to minimize wear and tear on the machine.
SPECIFICATIONS
General Dimensions and Weights
| Height | 72 in |
| Weight - Engine Option One | 3900 lbs |
| Width | 51 in |
| Length | 141.6 in |
Electrical System
| System Voltage | 12 |
| Battery | 950 CCA |
| Switches | Boom swing, boom height, creep propel, ignition, clutch, track gage, track speed range, SmartSweep, throttle |
| Radio Remote Control | Optional, wireless |
| Warning Lights | Engine faults |
| Shutdown System | High engine temperature and low oil pressure |
| Display | Multifunction display (MFD); Displays - hours, fuel level, engine speed, engine faults and engine status |
| Controller | Vermeer C248 with SmartSweep |
Chassis
| Operator Vision Shield Description | Abrasion-resistant coated polycarbonate |
| Control Station Description | Swing-out |
| Brake Type | Spring-applied and hydraulically released dual parking brakes |
Track Drive System
| Track Width - Extended | 51 in |
| Track Width - Retracted | 35 in |
| System Relief Pressure | 2900 psi (200 bar) |
| Ground Bearing Pressure - Soft Ground | 4.3 psi |
| Low Speed Travel | .7 mph |
| High Speed Travel | 1.6 mph |
| Track Brake Type | Integrated into motor/planetary unit |
| Track Drive Motor Type | Integral motor and planetary unit |
| Pump Flow at Maximum RPM | 9 gpm |
| Track Drive Pump Type | Tandem gear pump, pressure balanced |
| Number of Idlers | 10 |
| Track Length on Ground | 51.2 in |
| Track Type | 9-in (22.9-cm) rubber iron core |
| Track Frame Description | Tube and plate |
Cutterwheel System
| Number of Teeth | 30 |
| Chip Containment | 23 cu ft |
| Cutterwheel Guard | Standard |
| Reversible Pockets/Teeth | 30 |
| Number of Pockets | 30 |
| Number of Indexes | 2 |
| Tooth Description | Yellow Jacket cutter system |
| Cutterwheel Cut Below Ground | 16 in |
| Cutterwheel Cut Above Ground | 27 in |
| Cutterwheel Straight Line Dimension | 65 in |
| Cutterwheel Speed | 948 rpm |
| Cutterwheel Thickness | 1.1 in |
| Cutterwheel Diameter | 23 in |
Cutterwheel Drive Components
| Oil Type | SAE 75W90 synthetic gear oil |
| Driveshaft - U Joints | Two standard with double lip seal |
| Driveshaft | 2 universal joints |
| Oil Capacity - Lower Gearbox | 2.2 qt |
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil |
| Lower Gearbox | Straight bevel |
| Oil Capacity | 1.7 qt |
| Upper Gearbox | Straight bevel |
Remote Control Option
| Remote Display | LCD with remote control and machine functions status |
| Remote Functions | E-stop, throttle, cutter wheel clutch, boom swing, boom height, propel, track mode, track speed range, SmartSweep |
| Radio Remote Control | Optional |
Other Options
| Extended Warranty | Optional |
| Special Paint | Optional |
| Preventive Maintenance | Optional |
Hydraulic System
| Tank capacity | 9.6 gal |
| System relief pressure | 3000 psi |
| System Type | Tandem gear pump, pressure balanced |
| Recommended Oil Type | Vermeer Hypower 68 |
| Directional Control | Yes |
| Flow Control | Yes |
| Filtration Method | Full-flow 4 micron return filter, suction strainer |
| Pump Flow at Maximum RPM | 9 gpm |
Engine - Option one
| Make and Model | CAT C2.2 turbocharged Tier 4 final/Stage V Diesel |
| Oil Filter | Spin-on |
| Clutch Type | Electric clutch with brake |
| Fuel Type | Ultra-low sulfur diesel |
| Recommended Oil | 10W-30 |
| Fan | 16.5 in (40.7 cm) |
| Alternator | 85A |
| Coolant Capacity (Engine and Radiator) | 2.9 gal |
| Oil Volume with Filter | 8.5 qt |
| Max Fuel Consumption | 3.8 gph |
| Torque (Max) | 153 ft-lb |
| Gross Horsepower (Maximum) | 67 hp |
| Cooling Medium | Water/Antifreeze |
| Air Cleaner | Dry-type, restriction indicator, evacuator valve, safety element |
| Fuel Tank Capacity | 12 gal |
Operator Presence System
| Visual Interface | Yes |
| Quantity/Location | 2 |
| Sensor Type | Capacitive |
| Description | Yes |
SEE IT IN ACTION
