SC30TX Stump Cutter
Ease of operation and compact design.
- A compact footprint for maneuverability and access
- Designed with ease of maintenance in mind
- Safety-focused design
FEATURES & BENEFITS
Hydraulically-driven cutter wheel and ground drive
The elimination of belts or chain drives reduces service and maintenance.
Long tracks
Ground disturbance is minimized due to long tracks which provide lower ground pressure and improved stability.
Operator presence system
Control handle for the boom swing and boom raise/lower is equipped with operator presence capacitance-sensing handle. This system is intended to help protect the operator.
Smooth operation
The exclusive SmartSweep™ control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.
Vermeer AutoSweep® system
AutoSweep monitors engine speed and automatically adjusts cutter wheel sweep rate.
SPECIFICATIONS
Engine - Option one
| Oil Volume with Filter | 2 qt |
| Oil Filter | Spin-on |
| Make and Model | Kohler ECH740 |
| Maximum Angle of Continuous Operation | 25 deg |
| Gross Horsepower (Maximum) | 25 hp |
| Cooling Medium | Air/oil |
| Max Fuel Consumption | 2.4 gph |
| Fuel Tank Capacity | 6.8 gal |
| Torque (Max) | 42 ft-lb |
| Recommended Oil | Kohler oil or API CH4/SJ |
| Air Cleaner | 6 " (15.2 cm) 2-Stage dry |
| Number of Cylinders | 2 |
| Fuel Type | Gas |
Hydraulic System
| Filtration Method | Inline return filter |
| Recommended Oil Type | ISO 68 |
| Pump Flow at Maximum RPM | 16 gpm |
| System Type | Open loop |
| Oil Cooler | Yes. Fan-cooled |
| Directional Control | Standard |
| Tank capacity | 9 gal |
| Flow Control | Autosweep (option) |
| System relief pressure | 2750 psi |
General Dimensions and Weights
| Weight - Engine Option One | 1550 lbs |
| Height | 49 in |
| Width | 35 in |
| Length | 94 in |
Electrical System
| Switches | Cutter wheel drive |
| Battery | 405 |
| Standard Gauges | Hour meter/tach |
| System Voltage | 12 |
| Controller | Yes |
Cutterwheel Drive Components
| Lower Gearbox | Hydraulic motor |
Track Drive System
| Track Drive Motor Type | Geroter |
| Track Type | Rubber 7 " (17.8 cm) width |
| Track Brake Type | Hydrostatic |
| Pump Flow at Maximum RPM | 11.4 gpm (43.1 L/min) |
| Track Drive Pump Type | Hydrostatic |
| Number of Idlers | 5 |
| Type of Idler | Cast |
| Track Length on Ground | 31.4 " (79.7 cm) |
| Ground Bearing Pressure - Soft Ground | 3.4 psi |
| High Speed Travel | 3.2 mph |
| Track Width - Retracted | 35 " (88.9 cm) |
| Track Width - Extended | 35 " (88.9 cm) |
| System Relief Pressure | 2900 psi (200 bar) |
Cutterwheel System
| Cutterwheel Speed | 1110 rpm |
| Cutterwheel Thickness | .5 in |
| Number of Indexes | 2 |
| Number of Teeth | 16 |
| Tooth Description | Yellow Jacket Cutter System |
| Number of Pockets | 16 |
| Cutterwheel Guard | Yes |
| Reversible Pockets/Teeth | Yes |
| Cutterwheel Straight Line Dimension | 35.5 in |
| Cutterwheel Cut Above Ground | 25 in |
| Cutterwheel Cut Below Ground | 12 in |
| Chip Containment | 2.2 cu ft |
| Cutterwheel Diameter | 16 in |
Chassis
| Control Station Description | Fixed-rear |
Other Options
| Special Paint | Per request |
| Extended Warranty | Per request |
| Preventive Maintenance | Per request |
Cutterwheel system - Two
| Number of Teeth | 20 |
SEE IT IN ACTION
