The self-propelled SC292 stump cutter is equipped with a 26.5 hp (19.8 kW) EFI Kohler engine providing full-sized power in a compact unit. Contractors can now fit into tighter spaces for more efficient stump grinding; with duals removed the unit is only 35” (89 cm) wide. Convenience and safety features include a hydraulic ground drive system, exclusive Vermeer Yellow Jacket™ Cutter System and operator presence handle system design that disengages the cutter wheel if the operator lets go of the controls. Reduce engine, drivetrain and structural stress in typical stump removal with the optional AutoSweep function that automatically adjusts the cutter wheel sweep rate. The Vermeer SC292 is a great addition to any tree care and rental equipment fleet, a perfect complement to any Vermeer brush chipper or mini skid steer.

Features and Benefits

  • Starts easier with the electronic fuel injected 26.5 hp (19.8 kW) EFI Kohler engine.
  • Move easily between stumps with the selectable two-speed ground drive.
  • All of the belts are found on one side of the machine for convenient belt servicing.
  • Protect your stump cutter investment with a 2-year/2000 hour or 3-year/3000 hour extended warranty
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.


General Dimensions and Weights
Length 110" 279.4 cm
Width 49.8" 126.5 cm
Height 52" 132.1 cm
Overall Width Transport (without duals) 35" 88.9 cm
Overall Width Transport (with duals) 49.8" 126.5 cm
Overall Height Transport 52" 132.1 cm
Weight - Engine Option One 1285 lbs 582.9 kg
Sound Power 105.4
Engine Option One
Make and Model Kohler Command Pro EFI
Number of Cylinders 2
Gross Horsepower (Maximum) 26.5 hp 19.8 kw
Torque (Max) 44.3 ft-lb 60.1 Nm
Fuel Tank Capacity 6 gal 22.7 L
Max Fuel Consumption 2.7 gph 10.2 lph
Fuel Type Gas
Air Cleaner Dry-type safety element and restriction indicator
Oil Filter Spin on
Recommended Oil 10W30 Kohler
Oil Volume with Filter 2 qt 1.9 L
Cooling Medium Air
Alternator 20 amp
Clutch Type Electric clutch with brake
Cutterwheel System
Cutterwheel Diameter without Teeth 17" 43.2 cm
Cutterwheel Thickness .5" 1.3 cm
Cutterwheel Speed 1400 rpm
Cutterwheel Straight Line Dimension 47" 119.4 cm
Cutterwheel Cut Above Ground 24" 61 cm
Cutterwheel Cut Below Ground 15" 38.1 cm
Tooth Description Yellow Jacket cutter system
Number of Teeth 16
Number of Indexes 2
Number of Pockets 16
Reversible Pockets 16
Cutterwheel Guard Standard
Chip Containment 7.7 cu ft .2 cu m
Cutterwheel Drive Components
Belt Type V-Belt
Number of Primary Belts 2 individual (matched pair)
Jackshaft Dimension 1.3
Jackshaft Bearing Type Sealed ball
Bearing Dimensions 1.3 bore
Number of Secondary Belts 6 Banded
Cutterwheel Shaft 1.8" (4.8 cm)
Bearing Dimensions - Secondary Belt 1.8" (4.8 cm) double spherical roller pillow block
Hydraulic System
Tank capacity 4 gal 15.1 L
Recommended Oil Type Vermeer HyPower 68
System Type Open-loop series system
Filtration Method Pump suction strainer (100 mesh) and 6 micron return filter
Pump Flow at Maximum RPM 3.7 gpm 14 L/min
System relief pressure 2030 psi 140 bar
Flow Control AutoSweep (option) or 2 speed ground drive
Directional Control Manual hydraulic valve
Electrical System
System Voltage 12 V
Battery 400 CCA
Standard Gauges Hourmeter
Warning Lights Oil pressure, engine fault, operator presence status, clutch engage/disengagement status
Switches Two-speed ground drive, clutch engage/disengage, operator presence handles
Controller Vermeer ACS
Shutdown System Oil pressure shutdown
Frame Description Welded tube and plate steel
Control Station Description Fixed side locations
Toolbox Description Standard
Hitch Type Adapter for TLR25 trailer
Steerable Axle Type Manual single wheel or dual hydraulic steering axle
Tires - Option One 5.7" x 8" (14.5 x 20.3 cm) with rear wheels - duals standard
Fender Description Yes
Axle/Suspension Rigid/Fixed
Ground Drive
Low Speed Travel 66 ft/min 20.1 m/min
High Speed Travel 133 ft/min 40.5 m/min

Contact us now!

Our sales rep will get back to you asap.