D220x300

Whether you’re working in tough rural terrain or in a congested urban setting, conquer your jobsite with the D220x300 from Vermeer. With its maximum thrust/pullback rating of 242,100 lb (1076.9 kN), the drill offers contractors the power they need to maximize their productivity in a variety of ground conditions and settings. The D220x300 also features a roomy cab and an operator’s station with intuitive dual joysticks, common throughout the Navigator lineup, for increased operator efficiency.



Features and Benefits

  • The self-contained D220x300 creates a smaller footprint, making the drill suited to tighter-fitting jobsites while allowing operators to move the drill in and out of jobsites quickly and easily.
  • Featuring a pin-able, open-top vise for passage of larger tooling as well as increased visibility for maintenance work.
  • A sliding vise helps clamp the rod connection at different positions, allowing operators to utilize the vise for maximum efficiency when reaming or pulling product.
  • The D220x300 can stage five rods at a time, minimizing jobsite time spent loading rod.
  • See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Specs

General Dimensions and Weights
Length (Minimum Transport) 444" 1127.8 cm
Width (Minimum Transport) 100" 254 cm
Height (Minimum Transport) 135.6" 344.4 cm
Weight 74000 lbs 33565.8 kg
Angle of Approach 19 deg
Engine
Make and Model CAT C13 ACERT Tier 4i
Fuel Type Diesel
Maximum Engine RPM 2150 rpm
Gross Horsepower 415 hp 309.5 kw
Aspiration Turbocharged and after-cooled
Max Fuel Consumption 20.8 gph 78.7 lph
Maximum Operating Angle (Fore/Aft)* 30 degrees
Maximum Operating Angle (Left/Right)* 30 degrees
Operational
Thrust 242100 lbs 1076.9 kN
Pullback 242100 lbs 1076.9 kN
Maximum Carriage Speed at Maximum Engine RPM 120 ft/min 36.6 m/min
Maximum Carriage Speed in Low at Maximum Engine RPM 34 ft/min 10.4 m/min
Maximum Spindle Torque (Low at Maximum Engine RPM) 30200 ft-lb 40945.8 Nm
Maximum Spindle Torque (Medium at Maximum Engine RPM) 21100 ft-lb 28607.8 Nm
Maximum Spindle Torque (High at Maximum Engine RPM) 12100 ft-lb 16405.4 Nm
Maximum Spindle Speed at Max Engine RPM 164 rpm
Maximum Ground Drive Speed at Maximum Engine RPM 2.4 mph 3.9 km/h
Automated Rod Loader No
Noise Level at Operator's Ear 85 dB(A)
Fluid Capacities
Fuel Tank 134 gal 507.2 L
Hydraulic Tank 166 gal 628.4 L
Hydraulic System 200 gal 757.1 L
Drilling Fluid System Option One
Maximum Flow 330 gpm 1249.2 L/min
Maximum Pressure 1200 psi 82.7 bar
Brand Weatherford
Crane
Maximum Lifting Capacity 5950 lbs 2698.9 kg
Maximum Lifting Capacity - Boom Extended/Max Reach 2600 lbs 1179.3 kg
Rotation 406 deg
Maximum Reach 319" 810.3 cm
Optional Crane Yes
Umbilical Remote No
Wireless Remote Yes
Features
Breakout System Open-top, dual clamp, 10-1/2" diameter opening
Drilling Lights Yes
Flow Indicator Yes
Stakedown System No
Cab Yes
Strike Alert Yes
Remote Lockout Yes
Operator Presence Yes

Contact us now!

Our sales rep will get back to you asap.