D10x15 S3

Introducing a new direction in horizontal directional drilling (HDD). The D10x15 S3 offers even more power and performance than its predecessor, the D9x13 S3. It’s a reliable, economical solution for small service installation — built to help increase your crew’s productivity so you can go from one job to the next faster. With significant gains in horsepower and speed and a reduction in noise, the D10x15 S3 can help you put more product in the ground in a shorter amount of time.



Features and Benefits

  • An increase in carriage speed of almost 11% over its predecessor allows for faster cycle times and improved jobsite productivity.
  • Improved rotation performance helps boost productivity — an increase in spindle speed of up to 16% over its predecessor allows for a better mud slurry, enabling better mud flow while pulling in product in softer or reactive ground conditions.
  • A maximum ground drive speed (forward) of up to 3.3 mph (5.3 km/h) with optional wireless remote makes it faster than the closest competitor — helping make job setup times, jobsite entry and jobsite departure go more quickly.
  • A high rotational torque rating of 1500 ft-lb (2033.7 Nm) and 10,000 lb (44.5 kN) of thrust/pullback force provide the versatile power required for tough ground conditions and pulling reamers.
  • An almost 50% increase in tractive-effort-to-weight ratio over its predecessor enables improved tracking up and down ditches and enhanced maneuverability when fine-tuning setup and trailer positioning.
  • Reduced noise levels at operator’s ear makes a quieter working environment possible — creating less neighborhood disturbance and enabling easier communication among the crew.
  • Small footprint — 4" (10.2 cm) narrower than its closest competitor — allows the drill to easily maneuver within narrow jobsites and position side by side with a mix system on a trailer. 

Specs

General Dimensions and Weights
Length (Minimum Transport) 153" 388.6 cm
Width (Minimum Transport) 44" 111.8 cm
Height (Minimum Transport) 66" 167.6 cm
Weight 7200 lbs 3265.9 kg
Angle of Approach 22 deg
Engine
Make and Model Deutz TD2.9
Fuel Type Ultra low sulfur diesel
Maximum Engine RPM 2300 rpm
Gross Horsepower 60 hp 44.7 kw
Aspiration Turbocharged
Max Fuel Consumption 3.5 gph 13.2 lph
Maximum Operating Angle (Fore/Aft)* 30
Maximum Operating Angle (Left/Right)* 30
Operational
Thrust 10000 lbs 44.5 kN
Pullback 10000 lbs 44.5 kN
Maximum Carriage Speed at Maximum Engine RPM 208 ft/min 63.4 m/min
Maximum Spindle Torque (High at Maximum Engine RPM) 1500 ft-lb 2033.7 Nm
Maximum Spindle Speed at Max Engine RPM 220 rpm
Minimum Bore Diameter 2.5" 6.4 cm
Maximum Ground Drive Speed at Maximum Engine RPM 3.3 mph 5.3 km/h
Noise Level at Operator's Ear 86 dB(A)
Guaranteed sound power (CE-rating) 103 dB(A)
Fluid Capacities
Fuel Tank 18 gal 68.1 L
Hydraulic System 25 gal 94.6 L
Drilling Fluid System Option One
Maximum Flow 15 gpm 56.8 L/min
Maximum Pressure 1000 psi 68.9 bar
Brand FMC
On Board Tank Capacity 25 gal 94.6 L
Features
Breakout System Standard hyd vise
Flow Indicator Standard
Stakedown System Standard or aggressive
Strike Alert Standard
Remote Lockout Standard
Drill Pipe
Drill Rod Thread 1.66 Firestick® drill rod #200
Thread Type Firestick (#200)
Length 6' 1.8 m
Rod Diameter 1.7" (4.3 cm)
Joint Inside Diameter .8" 2 cm
Weight 26 lbs 11.8 kg
Minimum Bend Radius 95.5' 29.1 m

Contact us now!

Our sales rep will get back to you asap.