Engineered for high volume processing, the BC2100XL bullies through wood waste up to 21”/53.3 cm in diameter. The combination of the exclusive Vermeer SmartCrush feature and two patent-pending horizontal feed rollers produce a theoretical 10,000 lbs/4,536 kg of combined pulling force. Choose from one of three Cummins diesel engine options. Add on the optional winch to lift up to 4,000 lb/1,814 kg logs directly onto the feed table.
| Length - Feed Table Up, Tongue In | 235 " | 596.9 cm |
| Length - Table Down, Tongue Extended | 259 " | 657.9 cm |
| Width | 95.8 " | 243.2 cm |
| Height | 116.5 " | 295.9 cm |
| Weight - Engine Option One | 14700 lbs | 6667.8 kg |
| Tongue Weight - Engine Option One | 2410 lbs | 1093.2 kg |
| Sound Power | 86 dB(A) |
| Make and Model | Tier 3 Cummins QSB 6.7 L | |
| Number of Cylinders | 6 | |
| Gross Horsepower (Maximum) | 275 hp | 205.1 kw |
| Torque (Max) | 730 ft-lb | 989.8 Nm |
| Fuel Tank Capacity | 65 gal | 246.1 L |
| Max Fuel Consumption | 15.6 gph | 59.1 lph |
| Fuel Type | Low sulfur diesel | |
| Air Cleaner | Two stage dry-fleet guard opti air 1300 series | |
| Oil Filter | Spin-on | |
| Recommended Oil | API CH-4/SJ | |
| Oil Volume with Filter | 16 qt | 15.1 L |
| Maximum Angle of Continuous Operation | 30 deg | |
| Cooling Medium | Liquid | |
| Coolant Capacity (Engine and Radiator) | 7.3 gal | 27.6 L |
| Alternator | 95 amp Delco-Remy | |
| Fan | 26" (66 cm) suction | |
| Clutch Drive Engagement | Clutchless PTO |
| Feed Roller Orientation | Horizontal | |
| Number of Feed Rollers | 2 | |
| Feed Roller Clamp Load | 3500 lbs | 1587.6 kg |
| Feed Roller Clamp Type | Hydraulic | |
| Feed Roller Minimum Distance to Drum | 10 " | 25.4 cm |
| Feed Roller Dimension | 19" (48.3 cm) | |
| Weight of Feed Roller | 972 lbs | 440.9 kg |
| Feed Roller Dimension (Two) | 11" (27.9 cm) | |
| Number of Knives (2) | 2 | |
| Motor Displacement | 4.9 CID | |
| Motor Manufacturer | Eaton | |
| Feed Speed | 100 ft/min | |
| Infeed Table Width | 72 " | 182.9 cm |
| Infeed Table Length | 60.5 " | 153.7 cm |
| Infeed Hopper Height | 38.5 " | 97.8 cm |
| Infeed Throat Capacity | 40" x 24" (102 cm x 61 cm) | |
| Pinch Point - Distance to End of Feed Table | 60.5 " | 153.7 cm |
| Distance from Feed Table to Ground | 30.8 " | 78.2 cm |
| Infeed Table Material Thickness | .4 " | 1 cm |
| Bottom Feed Stop Bar | Standard | |
| Reset Method | Green hold to run button | |
| Four Position Feed Control Bar | Standard | |
| Positions | Four positions: emergency stop, forward, neutral, and reverse | |
| Green Hold to Run Button | Standard |
| Material Capacity | 21 " | 53.3 cm |
| Width | 28 " | 71.1 cm |
| Thickness | .5 " | 1.3 cm |
| Diameter | 36 " | 91.4 cm |
| Speed | 1084 rpm | |
| Weight With Shaft | 1500 lbs | 680.4 kg |
| Safety Lock - Number of Positions | 4 | |
| Number of Knives | 4 | |
| Knife Thickness | .6 " | 1.6 cm |
| Material | A8 chipper steel | |
| Useable Edges | 2 | |
| Knife Size | 5" x 14" (12.7 cm x 35.6 cm) | |
| Number of Bolts/Knife | 6 | |
| Replaceable Threaded Knife Block | Yes | |
| Number of Paddles | 4 | |
| Fixture Method | Weld-on | |
| Air Flow | 3600 cfm | |
| Bedknife Size | 3" x 27.5" (7.6 cm x 69.9 cm) | |
| Bedknife - Number of Useable Edges | 4 |
| Chute Height | 116 " | 294.6 cm |
| Bottom Thickness | .1 " | 0.3 cm |
| Top Thickness | .2 " | .5 cm |
| Side Wall Thickness | .1 " | 0.3 cm |
| Deflector Thickness | .1 " | 0.2 cm |
| Chute Rotation Angle | 270 deg | |
| Rotation Type | Hydraulic |
| Tank capacity | 24 gal | 90.9 L |
| Recommended Oil Type | Vermeer Hy-Power 68 | |
| System Type | Open center | |
| Filtration Method | 10 micron return, 100 mesh suction | |
| Pump Flow at Maximum RPM | 13 gpm | 49.2 L/min |
| System relief pressure | 2750 psi | 189.6 bar |
| Auto Reverse PSI | 2550 psi | 175.8 bar |
| Directional Control | Yes | |
| Oil Cooler | Yes |
| System Voltage | 12 volts | |
| Battery | 2 - 950 CCA | |
| Standard Gauges | Tachometer, hour meter, trip meter, coolant temperature, engine oil pressure, battery voltage, engine fault code, engine shutdown light and engine fault warning light | |
| Switches | Engine speed, SmartFeed droop (non-remote only) | |
| Controller | C148 | |
| Shutdown System | Coolant temperature, intake manifold temperature, oil pressure | |
| Radio Remote Control | Engine speed, discharge chute, forward, stop, reverse feed, SmartCrush down pressure level, SmartFeed droop setting and engine stop |
| Frame Description | 2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel | |
| Toolbox Description | Lockable | |
| Tongue Description | 2.5" x 4.5" x .38" (6.4 cm x 11.4 cm x 1 cm) | |
| Tongue Extension | 1" - 12" extension (2.5 cm - 30.5 cm) | |
| Hitch Type | 3 " (7.6 cm) pintle | |
| Fender Description | Bolt-on | |
| Axle/Suspension | Tandem torsion 8000 lb (3628.7 kg) capacity | |
| Type - Option One | Tandem torsion | |
| Manufacturer - Option One | Dexter | |
| Capacity - Option One | 8,000 | |
| Tires - Option One | 235/75R17.5 load range J | |
| Wheels - Option One | 17.5" x 6.75" (44.5 cm x 17.1 cm) BC of 8 on 6.5" (16.5 cm) | |
| Brake Type | Electric | |
| Trailer Light Type | LED |
| Winch Relief System | 1900 psi | 131 bar |
| Winch Boom Structure | Welded structure | |
| Winch Controls | Rope in and out; winch boom up and down | |
| Winch Rope | 9/16" (1.4 cm) double-braided DNEEMA Core | |
| Rope Length | 150 ' | 45.7 m |
| Rope Line Pull | 4000 lbs | 1814.4 kg |
| Rope Choker | Standard Vermeer choker design |
| Special Paint | Optional | |
| Extended Warranty | Optional | |
| Preventive Maintenance | Optional | |
| Adjustable Height Discharge Chute | Optional | |
| Remote Control | Optional | |
| Hydraulic Outriggers | Optional |